RC30-H Cutoff Lathe (3 inch)

RC30-H Overhead Cutoff Lathe


The Hautau RC30-H Rotary Pipe Cutoff Lathe is the smallest of our H-series rotary cutoffs with full-range chucking, for high-speed cutting and chamfering of tube or bar up to 3 inches in diameter.

  • OD: .75 inch to 3.0 inch (smaller with special jaws)
  • Wall Thickness: .032 inch to 1.25 inch
  • Cut Lengths: .75 inch min / 480 inches maxRC15 Tubes
  • Up to three cut lengths per tube (10 optional)
  • Random lengths are automatically measured and optimized
  • The RC30-H Rotary Tube Cutoff Lathes excel at cutting small tubes up to 3″ diameter and have the highest performance of all our H-series cutoffs.




H Series Cutoff Lathe Advantages

  • Chamfer OD and ID on both tube endsTooling
  • Quiet rotating-head/stationary tube design
  • Cutoff head rotates around the tube
  • Dual hydraulic chucks hold the tube on both sides of the cut
  • No collet or jaw changes
  • Chucks automatically adjust for tube or pipe size
  • Fast, pushbutton changeover for tube diameter and cut-off length
  • Cutoff piece is held and does not ”break loose”
  • Cut long lengths without “steady rests”


Watch RC30-H video