|
|
Hautau RC lathe cutoff machines have fast, pushbutton changeover for all tube
cutting and chamfering
setups,
with options for producing inside chamfers on both tube ends. Also cuts
solid bar up to 2" diameter.
|
Machine Model - |
RC15 |
RC30 |
RC50 |
RC60 |
RC80 |
|
Maximum Tube Diameter* |
1.5" |
3.0” |
5.0” |
6.7” |
9.1” |
|
Minimum Tube Diameter* |
.25” |
.75” |
1.00” |
1.25” |
3.5” |
|
Minimum Cut Length |
.50” |
.50” |
.75” |
.75” |
.75” |
|
Maximum Cut Length |
180” |
180” |
180” |
180” |
180” |
|
Cutoff Length Accuracy** |
±.005" |
±.005" |
±.005" |
±.005" |
±.005" |
|
Maximum Tube Advance Rate |
50 inch/sec. |
50 inch/sec. |
30 inch/sec. |
30 inch/sec. |
30 inch/sec. |
|
Maximum Cycle Rate |
1200/hour |
1100/hour |
900/hour |
900/hour |
600/hour |
|
Maximum Headstock Speed |
1000 RPM |
600 RPM |
510 RPM |
510 RPM |
450 RPM |
|
Headstock Motor |
15 HP |
30 HP Baldorä |
|||
|
Hydraulic Pump |
Bosch ä 28 GPM Whisper Pump®, rated for 3000 PSI max. continuous |
||||
|
Hydraulic Pump Motor |
20 HP Baldor ä |
||||
|
Hydraulic Filtration |
10µ pressure line, 10µ return line, (electrically monitored) |
||||
|
Hydraulic Cooling |
-Integral off-line pump/cooler/filter system, 12 GPM, 1 HP Baldor ämotor |
||||
|
Control System |
Allen-Bradley ä ControlLogix®Integrated servo motion control Allen-Bradleyä PanelView Plus® ColorTouch screen Ethernet/IP communications Dial-Up Modem or Paging Modem (Optional) |
||||
|
Electrical supply |
480 volt, 3 phase 80 amps maximum (240 volt optional) |
||||
|
Air Supply |
80 PSI, 1/2” NPT |
||||
|
Machine weight (no loader, lbs.) |
12,000 |
14,000 |
15,500 |
17,000 |
18,500 |
*Larger or smaller with special jaws. **Based on 30” cut length. Typical length repeatability is ±.003”. Specifications subject to change without notice.
| Hautau Tube Cutoff Systems, LLC 11199 State Rt. 101 Brookville, Indiana 47012 |
(765)647-1600 (765)647-1620 (Fax) |
www.hautau.com Feb. 2004 ~ All rights reserved. |