RC60 Rotary-Head Tube Cutoff Machine 7"

Advanced Rotating-head cutoff machine that cuts tube and chamfers in one operation.

The RC60 Rotating-Head Cutoff Machine is our most popular model, with a diameter range of 1.5" to 7" and capacity to cutoff a wide range of popular tube and pipe. If you are using a bandsaw or cold saw to cut tube or pipe, you know that the sharp edges have to be deburred or chamfered to produce high-quality workpieces. And if you're using a conventional cutoff lathe, you can't chamfer all the tube edges. Our rotary-headstock cutoff machines combine cut-off and chamfering in one operation. These versatile machines can cut, face, chamfer, groove and bore quickly and efficiently. This eliminates secondary operations and reduces labor.

rotary-head-cutoff-machine-RC60

OD: 1.5 inch to 6.75 inch

Wall Thickness: .040 inch to 1.0 inch

Cut Lengths: 0.75 inch min / 480 inches max • Up to three cut lengths per tube • Random lengths are automatically measured and optimized

  • 30HP rotary head stock has ample power for fast cut off
  • Constant surface speed (CSS) ensures optimum production rates
  • Tube chucks adjust automatically to the programmed diameter
      – no downtime for collet or jaw replacement.
  • Cut, face, chamfer and groove tubes in one chucking
  • Eliminate secondary operations and reduce labor
  • Cut mixed long and short lengths for the best material utilization even when cutting from random length bundles.
  • Tube runout and sorting systems available for multi-length cutting.
rotary-headstock-cutoff-tubes

What's different about our rotating-head tube cutoff machines?

  • Our machines benefit from over 45 years of continuous development.
  • The cutoff headstock rotates around the tube.
  • The dual hydraulic chucks hold the tube on both sides of the cut.
  • There are no collet or chuck jaw changes required.
  • The tube chucks will automatically adjust for tube or pipe size.
  • Pushbutton changeover is fast for diameter and cut-off length.
  • The cutoff piece is held and does not break loose.
  • You can cut long lengths without “steady rests”.

View Specifications

rotary-head-headstock